- Sales: +91 7838 006 222
- Services: +91 7838 006 888
Fine Wire Drawing Machine With Annealer – 24DHT-VG150
Fine Wire Drawing Machine with Annealer
High-performance Fine Wire Drawing Machine with Annealer, offering precise tension control, zero slip design, and up to 25% energy savings.
Features of Fine Wire Drawing Machine with Annealer
- Automatic tension control by DC or dual inverter.
- Zero slip pilot design, high productivity; good quality finished wire.
- Low power consumption, a reduction of 20-25% compared to the traditional type of machine.
- Description
Description
Fine Wire Drawing Machine with Annealer – 24DHT-VG150 | High-Quality Wire Finishing, Energy Saving, Integrated Online Annealing
The 24DHT-VG150 is a next-generation fine wire drawing machine equipped with an online annealing system for superior wire quality and performance. Built for industries demanding precision and productivity, it combines advanced flat belt drive technology, weight-type tension control, and an automatic take-up correction system for consistent results.
The machine handles input wire diameters from Ø0.5–1.2mm and finishes wires down to Ø0.08–0.32mm with maximum wire speeds of 2000M/min. The integrated annealing system ensures the wire achieves excellent ductility and conductivity, making it ideal for applications requiring ultra-fine, high-quality wires.
Key Features:
-
Automatic tension control via digital readout system.
-
Online annealer with pole DC current output control.
-
Energy savings of up to 25% compared to traditional models.
-
High mechanical elongation of 13%±8.7%.
-
Max wire speed of 2000 meters/minute.
-
High-efficiency ceramic plasma capstan.
-
Sturdy steel plate welded body with four vertical shafts for stability.
-
Advanced flat belt drive with synchronous motor.
-
Expansion shaft or single shaft cone bobbin loading system (optional).
-
Automatic digital control of take-up.
-
Spray-type lubrication system for optimal performance.
Technical Parameters
| MODEL | 24DHT – VG150 |
|---|---|
| Control system | Digital readout |
| Wire inlet dia | Ø0.5-Ø1.2mm |
| Wire finished dia | Ø0.1-Ø0.32mm |
| Max wire speed | 2000M/min |
| Max dies no | 24 |
| Transmission type | Advanced Flat Belt Drive |
| Mechanical elongation | 13%+8.7% |
| Capstan | Ceramic Plasma |
| Construction of the machine body | Steel plate welded, vertical four shafts |
| Capston Dia (Max) | Ø242mm |
| Fix speed capston dia | Ø206mm |
| Spool bobbin size | Ø300xØ215x270mm |
| Bobbin loading & unloading type | Expansion shaft or single shaft cone (optional) |
| Max Loading Capacity | 50Kg |
| Traversing | Synchronous motor and flat belt |
| Main Motor | 11kw |
| Spooler Motor | 4kw |
| Correction System | Automatic digital control of take-up |
| Tension control | Weight Type Tension Pulley |
| Lubrication Type | Spray Type |
| Brake | Magnetic Brake |
| Lubrication type for bearing | Without Oil |
| Annealing control | Pole Dc Current Output |
| Annealing capacity | 21Kva |
| Annealing voltage | 0-57V |
| Annealing current | 300A |
| Connect load | 15Kw+21Kva |
| Steam consumption | 6-9Kg/H 0.2-0.3Mpa(26Kw) |
| Cooling water consumption | 4-8M/H, 0.2-0.25Mpa |
| Lubrication type for bearing | Without Oil |
| Air consumption | 15-25m3/H 0.4-0.6Mpa |
| Lubricant Capacity | >50Lmin |
| Machine Dimension | 4.7 x 2.5 x 2.3M |
| Gross Weight | 3000Kg |
Delivering consistent quality, maximum productivity, and energy efficiency, the 24DHT-VG150 is the ultimate solution for high-end fine wire drawing operations with annealing requirements.
