Plot No.- 318, Phase-V, Sector- 56,

KIA, HSIIDC, Kundli, Haryana- 131028

Sales: +91 931-007-6645

Service: +91 7838-006-222

Wire Drawing Machine
Features
  • Automatic tension control by DC or dual inverter.
  • Zero slip pilot design, high productivity; good quality finished wire.
  • Low power consumption, a reduction of 20-25% compared to traditional type of machine.
Technical Parameters
MODEL 24DHT - VG150
Control system Digital readout
Wire inlet dia Ø0.5-Ø1.2mm
Wire finished dia Ø0.1-Ø0.32mm
Max wire speed 2000M/min
Max dies no 24
Transmission type Advanced Flat Belt Drive
Mechanical elongation 13%+8.7%
Capstan Ceramic Plasma
Construction of the machine body Steel plate welded, vertical four shafts
Capston Dia (Max) Ø242mm
Fix speed capston dia Ø206mm
Spool bobbin size Ø300xØ215x270mm
Bobbin loading & unloading type Expansion shaft or single shaft cone (optional)
Max Loading Capacity 50Kg
Traversing Synchronous motor and flat belt
Main Motor 11kw
Spooler Motor 4kw
Correction System Automatic digital control of take-up
Tension control Weight Type Tension Pulley
Lubrication Type Spray Type
Brake Magnetic Brake
Lubrication type for bearing Without Oil
Annealing control Pole Dc Current Output
Annealing capacity 21Kva
Annealing voltage 0-57V
Annealing current 300A
Connect load 15Kw+21Kva
Steam consumption  6-9Kg/H 0.2-0.3Mpa(26Kw)
Cooling water consumption 4-8M/H, 0.2-0.25Mpa
Lubrication type for bearing Without Oil
Air consumption  15-25m3/H 0.4-0.6Mpa
Lubricant Capacity >50Lmin
Machine Dimension 4.7 x 2.5 x 2.3M
Gross Weight 3000Kg
Inquire Now
<